Entrance matting systems

Metal framed entrance matting systems have integrated channels that collect debris below the surface of the mat, or scraper bars made from plastic or aluminium, which scrape the dirt from shoes rather than collect it.

Supplied in sheets or rolls, entrance carpets soak up moisture from shoes, reducing the potential for slips.

Carpet tiles for entrances work in a similar way, and may include PVC or rubber scraper bars.

Loose mats are available with a rubber profile for additional strength, and can be easily relocated if required.

FAQs

What materials are used for commercial entrance matting?

Nylon, polypropylene, pvc and rubber are the most common materials used for entrance matting.

Nylon entrance matting is durable, resistant to crushing, hard to impregnate and quick to dry. It is often used in areas with high footfall including entrances to retail sites and travel centres.

Polypropylene entrance matting is used in framed systems, carpets and carpet tiles. Generally very durable, their abrasive texture is good at scraping dry dust. Polypropylene entrance matting is used for indoor zones inside buildings and reception areas. It is a popular choice for hotels, offices, leisure and retail entrances.

PVC entrance matting, also referred to as ‘Vinyl’, is a lower cost option but is not suitable for cold environments which can make PVC brittle and prone to cracking.

Rubber entrance matting is used outside building entrances (zones 1 and 2) to remove coarse and intermediate dirt before moving into zone 3 where fine dirt and moisture are removed. Some rubber matting design use open holes, others have solid textured surfaces. Rubber is also used as a backing material to cushion sound and prevent carpet movement.

Coir tends to be used for residential entrance areas. Made from coconut shell fibre, it absorbs mositure but is not quick drying and is prone to soiling, Coir is also not considered a wheel-chair friendly surface.