Frame / panel Frame only
Pre-plumbing Pre-plumbed
Suitability Toilets
Frame materials Steel
Frame height (mm) 820
 
 

Part of the Geberit Duofix range of sanitary objects with universal and self-supporting installation elements in drywall construction. It is suitable for partition wall installations, inwall installations in lightweight stud walls as well as part-height and room-height prewall installations, and can be used in new buildings as well as modernisations.

Duofix wall-hung WC frame, H82, with 15cm Kappa cistern

  • Ideal for areas with height restrictions
  • A frame option for the more traditional bathroom design
  • Ideal for use where sanitaryware is to be fitted below a window
  • Allows for top or front access
  • Also available as H82 version

Application purpose

  • For installation of a wall-hung WC with bolt fixings set at 180 or 230mm centres
  • For installation in a partial-height Duofix system wall in front of a solid or drywall construction
  • For mounting in front of a solid or drywall construction
  • For a screed of 0-200mm

Characteristics

  • Self-supporting
  • Frame with C profile 40/40mm
  • Powder-coated frame, ultramarine blue
  • Galvanised leg supports, steplessly adjustable 0-200mm
  • Retractable feet to 5cm
  • Rotating foot plate, for installation in UW50 and UW75 profiles
  • Frame with holes ø 9mm for fastening in wood frame construction
  • Fast adjustment of the actuator rods for flush plate
  • Concealed cistern fully insulated against condensation
  • Protection housing for service opening, can be cut to length
  • Frame height 820mm
  • With wall brackets to allow up to a 200mm duct. Use extension bolts 111.887.00.1 for larger ducts up to 400mm
  • Concealed cistern UP200 with front or top actuation
  • Dual flush with flush plates Artline or Kappa flush plates
  • Dual flush with HyTouch pneumatic button
  • Single flush with HyTouch pneumatic and mechanical buttons
  • Water supply connection left
  • Fastening for outlet bend sound-absorbing
  • Connection hose to angle stop valve can be screw-connected by hand
  • For pans with contact surfaces smaller than 170mm (see accessory 111.847.00.1)
  • To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual flush requires material number 242.310.00.1 (note: must be used with pans designed for low volume flush)
  • The cistern can be operated with used water (rainwater) provided it is passed through a filter system first

Scope of delivery

  • 2 Duofix PreWall brackets for system
  • Water supply connection R 1/2" male BSP parallel thread with integrated angle stop valve
  • Protection housing for service opening
  • 2 threaded rods M12 for ceramics fastening
  • WC connection set, ø 90 mm
  • WC outlet bend, HDPE, ø 90 mm
  • Adaptor sleeve, ø 90/110 mm
  • Protection plug
  • Fastening material
  • Excluded:  Flush plate


Part of the Geberit Duofix range of sanitary objects with universal and self-supporting installation elements in drywall construction. It is suitable for partition wall installations, inwall installations in lightweight stud walls as well as part-height and room-height prewall installations, and can be used in new buildings as well as modernisations.

Duofix wall-hung WC frame, H82, with 15cm Kappa cistern

  • Ideal for areas with height restrictions
  • A frame option for the more traditional bathroom design
  • Ideal for use where sanitaryware is to be fitted below a window
  • Allows for top or front access
  • Also available as H82 version

Application purpose

  • For installation of a wall-hung WC with bolt fixings set at 180 or 230mm centres
  • For installation in a partial-height Duofix system wall in front of a solid or drywall construction
  • For mounting in front of a solid or drywall construction
  • For a screed of 0-200mm

Characteristics

  • Self-supporting
  • Frame with C profile 40/40mm
  • Powder-coated frame, ultramarine blue
  • Galvanised leg supports, steplessly adjustable 0-200mm
  • Retractable feet to 5cm
  • Rotating foot plate, for installation in UW50 and UW75 profiles
  • Frame with holes ø 9mm for fastening in wood frame construction
  • Fast adjustment of the actuator rods for flush plate
  • Concealed cistern fully insulated against condensation
  • Protection housing for service opening, can be cut to length
  • Frame height 820mm
  • With wall brackets to allow up to a 200mm duct. Use extension bolts 111.887.00.1 for larger ducts up to 400mm
  • Concealed cistern UP200 with front or top actuation
  • Dual flush with flush plates Artline or Kappa flush plates
  • Dual flush with HyTouch pneumatic button
  • Single flush with HyTouch pneumatic and mechanical buttons
  • Water supply connection left
  • Fastening for outlet bend sound-absorbing
  • Connection hose to angle stop valve can be screw-connected by hand
  • For pans with contact surfaces smaller than 170mm (see accessory 111.847.00.1)
  • To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual flush requires material number 242.310.00.1 (note: must be used with pans designed for low volume flush)
  • The cistern can be operated with used water (rainwater) provided it is passed through a filter system first

Scope of delivery

  • 2 Duofix PreWall brackets for system
  • Water supply connection R 1/2" male BSP parallel thread with integrated angle stop valve
  • Protection housing for service opening
  • 2 threaded rods M12 for ceramics fastening
  • WC connection set, ø 90 mm
  • WC outlet bend, HDPE, ø 90 mm
  • Adaptor sleeve, ø 90/110 mm
  • Protection plug
  • Fastening material
  • Excluded:  Flush plate


Washroom integrated plumbing - products from other companies

Washroom integrated plumbing - all companies