Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Washroom integrated plumbing
Washroom integrated plumbing - helping you find the best solution for your project.
ProSys™ - in-wall frames, cisterns and flush plates
ProSys™ is a complete installation system for toilets, basins, urinals and accessories. It offers a one-stop in-wall and front-of-wall solution for specifiers including frames, cisterns and flush plates. These combine seamlessly with Ideal Standard’s range of ceramics to ensure optimal performance in all domestic bathroom and commercial washroom
- The Geberit H79 Duofix wall-hung WC frame has been specially designed for installation in bathroom furniture with a full length front panel. It is also suitable for applications where an amount of storage within the furniture is desired: for installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres; for installation in bathroom
- The Duofix wasbasin frame is used for the installation of a wall-hung washbasin: bolt fixings set at 50-380mm centres (with accessories 111.868.00.1 fastening distance can extend from 380-580mm); for installation in a room-high Duofix system wall; for installation in a load bearing stud wall; for a screed of 0-200mm; for washbasin with concealed
- The Duofix frame for support handles is used for the installation of grab rails: for a screed of 0-200mm; for installation in a room-height Duofix system wall in front of a solid or drywall construction; for installation in a room-high Duofix system wall; for mounting in front of a solid or drywall construction (order PreWall brackets 111.844.00.1
- The Geberit Duofix H98/82 is a pre-plumbed wall-hung basin frame for heights between 820 and 980mm: for installation in a partial-height Duofix system wall in front of a solid or drywall construction; for installation of a wall-hung washbasin with bolt fixings set at 50-380mm centres (with accessories 111.868.00.1 fastening distance can extend
- The Geberit Duofix Omega H82 is a pre-plumbed WC frame that provides the flexibility to install the WC in small or awkwardly shaped bathrooms, with a low installation height of 82cm. It can be connected to the water supply from either the rear or the side. Depending on the construction situation, the flush plate can be attached to the top or front
- The Geberit Duofix H112 is a pre-plumbed wall-hung WC frame supplied with a 12cm Sigma concealed cistern with front actuation: for a screed of 0 - 200 mm (not in room height applications); for installation in a partial-height / room height Duofix system wall in front of a solid or drywall construction; for installation of a wall-hung WC with bolt
- The Geberit Duofix H112 is a pre-plumbed wall-hung basin frame for heights up to 1120mm: for installation of a wall-hung washbasin with bolt fixings set at 50-380mm centres (with accessories 111.868.00.1 fastening distance can extend from 380-580mm); for installation in a room-high Duofix system wall; for installation in a load bearing stud wall
- The Geberit Duofix H112 is a pre-plumbed frame for wall-hung WCs with a concealed Omega cistern that can be connected to the water supply from either the rear or the side. Depending on the construction situation, the flush plate can be attached to the top or front of the cistern, with no special tools required. This ensures that fitting time and
- The Duofix H112 WC frame, with 12cm Sigma cistern is used for wall-hung WC applications and is pre-plumbed, providing quick and easy installation: for installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres; for installation in a room-height Duofix system wall in front of a solid or drywall construction; for mounting in front
- Installed at a height of 98 cm, the Omega concealed cistern can be connected to the water supply from either the rear or the side. The flush plate can be attached to the top or front of the cistern, with no special tools required to install the cistern or the flush plate. This ensures that fitting time and disruption are kept to an absolute
- The Maxwall duct panelling system has a well-deserved reputation for simplicity, flexibility and ease of installation. Its design ensures that it comes to site ready to be installed. By making sure your design requirements are fully met before delivery, our manufacturing process eliminates on-site laminating: plywood frame construction; no on-site
- PRODUCT
- Maxwood Washrooms
- The Emergency Care Centre at the Aberdeen Royal Infirmary is due for completion later this year, with more than £250,000 of Geberit products installed. Offering the complete package of ease of installation, innovation and discreteness that is so important in the health care industry, Geberit pipework and sanitary systems were the natural choice
Washroom integrated plumbing - helping you find the best companies for your project.
Ideal-Standard
The Bathroom Works, National Avenue, Kingston-upon-Hull, HU5 4HSBushboard Washroom Systems
Bushboard Washrooms has over 80 years experience delivering well designed, flexible products that work across all sectors including education, commercial, healthcare, leisure and retail, amongst others. With washroom equipment including cubicles, vanity units, lockers, benching and a full range of washroom accessories, we offer products to meet
Unit 1400, First Floor Montagu Court, Kettering Parkway, Kettering Venture Park, Kettering, NN15 6XRGeberit
Manufactures washroom installation systems and accessories which provide designers with time-saving, water-saving and energy-saving benefits. The frame system has been designed to support wall-hung sanitaryware without the need for supporting walls. Frames are available for toilet pans, washbasins, bidets and urinals. Toilet pan frames have
Geberit House, Edgehill Drive, Warwick, CV34 6NHThrislington Cubicles
Factory prefabricated access panel system based on full aluminium framework with hinged access doors. Doors secured by concealed catches. Available in hpl, sgl, aluminium, stainless, veneer and glass and come with a 10 year guarantee
Prince William Avenue, North Wales Trade Centre, Sandycroft, Deeside, CH5 2QZVenesta
Manufactures an integrated washroom system for use in offices, schools, motorway services, airport terminals and hospitals. The system is supplied with all sanitaryware, fittings, and supply and waste pipework already attached to panels or fitted into vanity units. Designed for ease of installation, the system is installed by click-fixing the
1st Floor, Units 19-23 St George's Square, St George's Centre, Gravesend, DA11 0TAAxent Washrooms & Interiors
Image House, 75 Oswin Road, Leicester, LE3 1HRConcept Cubicle Systems
Duct panels conceal pipework and cisterns behind urinals and WCs, offering a functional yet contemporary aesthetic to high-end washrooms
Union House, Unit 2a Altrincham Business Park, Stuart Road, Altrincham, WA14 5GJCubicle Systems
Offers pre-plumbed washroom panels for toilets. Also offers a range of pre-plumbed, duct mounted modules. This range has been designed to comply with HTM 64 and Department of Health guidance for effective infection control in healthcare environments
Gore Road Industrial Estate, New Milton, BH25 6SAFocus Trovex
Innova House, 15 Rash's Green, Norfolk, NR19 1JGLam-Art
An Integrated Plumbing System (IPS) is essential in all washrooms to conceal pipes and services. The demountable panels allow easy and safe access for maintenance and repair. Any architectural features such as columns and pilasters can be accommodated. Lam-Art panels are available in solid grade compact laminate and moisture resistant chipboard
122 Liff Road, Dundee, DD2 2TLMaxwood Washrooms
Maxwood ducting systems are sturdily built and exceptionally easy to fit on site. Manufactured with a range of face panelling options including: wood-veneered board; glass panels; aluminium-faced panels; high-pressure laminate; solid-grade laminate; melamine-faced chipboard. The Maxwall and Medimax systems make it possible to tie in wall panelling
121-131 Rosebery Avenue, London, EC1R 4RF
